How to Install a Helicoil Step by Step Guide

Understanding What a Helicoil Is and Why You Might Need One

A helicoil is a small, coiled wire insert made from stainless steel or other durable metals. It's designed to repair damaged threads in bolt holes. When a bolt hole becomes stripped—meaning the threads that hold the bolt are damaged or worn—a helicoil provides new threads for the bolt to grip. This is particularly useful because replacing an entire component just because of stripped threads would be wasteful and expensive.

Free Guide to Finding Car Auctions Near You →

Stripped threads occur in several common situations. In automotive work, a bolt may be overtightened and strip the aluminum threads in an engine block. In machinery maintenance, repeated use of the same bolt hole can wear down the threads over time. In manufacturing and assembly, a bolt may be installed at an angle, damaging the thread pattern. According to industry data, thread damage accounts for approximately 15-20% of fastener-related equipment failures in manufacturing environments.

Helicoils work by creating a new set of threads inside the damaged hole. The insert itself has internal threads that match standard bolt sizes. Once installed, a bolt screws into the helicoil rather than directly into the damaged material. This approach is far more cost-effective than drilling out a hole and installing a larger bolt, which may not fit your design specifications.

Different helicoil sizes correspond to different bolt holes. For example, a helicoil kit for a 1/4-inch bolt hole contains different components than one for a 3/8-inch hole. Understanding which size you need is the first critical step. The original bolt size—not the hole size—determines which helicoil kit to purchase.

Practical takeaway: Before starting any helicoil repair, identify the original bolt size of the damaged hole. Measure the bolt or check the equipment documentation. This single step prevents purchasing the wrong kit and ensures your repair will succeed.

Gathering the Right Tools and Materials

Installing a helicoil requires specific tools that you may not already have in a basic tool kit. The essential components include a helicoil kit (which contains the insert and installation tool), a drill, a tap tool, a tap wrench, and measuring instruments. Each of these serves a specific purpose in the installation process, and using the correct tools matters significantly for a successful repair.

Your Free Guide to the Latest Gadgets →

A helicoil kit typically includes several items packaged together. The kit contains the helicoil insert itself—the coiled wire that will become your new threads. It also includes a drill bit sized specifically for that kit, a tap (a tool that cuts new threads), and an installation tool that helps position and seat the helicoil properly. Some kits include a tap wrench, while others require you to provide your own. Quality helicoil kits are widely available from industrial suppliers, automotive parts stores, and online retailers, with prices typically ranging from $15 to $50 depending on the bolt size and number of inserts included.

Beyond the kit itself, you'll need several additional tools. A power drill or hand drill is necessary for enlarging the damaged hole. A caliper or measuring ruler helps verify hole size. A wire brush or cleaning tools remove debris and old material from the hole. Safety equipment including eye protection and work gloves protects you during the drilling and tapping process. A stable work surface or vise holds the component securely while you work.

Material preparation is also important. Before starting, clean the work area thoroughly. Remove any grease, dirt, or loose material around the damaged hole. If the component is metal, a wire brush removes oxidation and surface contamination. For precision work, mark the exact center of the damaged hole with a marker or center punch. This prevents the drill bit from wandering when you start drilling.

Practical takeaway: Purchase a complete helicoil kit matched to your bolt size and gather all additional tools before beginning work. Having everything on hand prevents interruptions and reduces the chance of mistakes during the installation process.

Preparing the Damaged Hole for Repair

Proper hole preparation determines whether your helicoil repair will hold securely. This stage involves removing damaged material and enlarging the hole to accept the helicoil insert. The process requires patience and precision because mistakes at this stage are difficult to correct.

Learn About New York DMV Account Login →

Start by marking the exact center of the damaged hole. If the hole is already visible, use a center punch—a tool that creates a small indentation—to mark the center point. This indentation guides your drill bit and prevents it from slipping sideways. For very small holes, you may use a marker to indicate the center, but a physical indentation is more reliable. Position your component securely in a vise or on a stable work surface. The component should not move while you're drilling.

Select the correct drill bit from your helicoil kit. Helicoil kits are designed so that the included drill bit enlarges the hole to exactly the right size for the helicoil. Using a different drill bit will result in threads that don't match the helicoil insert. Install the drill bit in your power drill or hand drill, ensuring it's secure.

Begin drilling slowly. Apply steady, moderate pressure—not excessive force. Excessive force can overheat the drill bit, causing it to dull or break, and can also cause the drill to skid out of position. Let the drill do the work. For metal components, drilling speed matters. Slower speeds work better for steel and aluminum than high-speed drilling. If using a power drill with adjustable speed, start at a medium speed setting. Periodically stop drilling and remove the drill bit to clear metal chips from the hole. These chips can cause friction and heat buildup.

Continue drilling until the hole reaches the correct depth. Your helicoil kit instructions specify the required depth. This is typically measured from the surface of the component. Use a measuring tool or mark your drill bit with tape at the correct depth to know when to stop.

After drilling, the hole may have rough edges or metal burrs—small raised edges. Remove these using a deburring tool, file, or sandpaper. These burrs can interfere with the tap tool in the next step and should be cleaned away.

Practical takeaway: Take time with the drilling step. A hole drilled slowly and steadily at the correct depth with a clean center mark will result in a properly sized cavity for your helicoil and a repair that lasts.

Cutting New Threads with the Tap Tool

The tap tool is what actually cuts new threads inside the enlarged hole. This step transforms a smooth hole into a threaded hole that matches the helicoil insert. Using the tap correctly is essential because the threads must be precise to accept the helicoil properly.

Free Guide to Copying and Pasting Emails →

Your helicoil kit includes a tap tool sized specifically for that kit. The tap has cutting edges that remove small amounts of metal in a spiral pattern, creating threads. Install the tap into a tap wrench—a handle that lets you turn the tap by hand. The tap wrench grips the tap securely while giving you leverage to turn it.

Position the tap at the entrance of the hole you just drilled. The tap should be perpendicular to the surface—perfectly straight, not at an angle. This is critical because angled tapping produces threads that don't align with the helicoil insert. Many professionals use a small level or check the angle by eye before starting. If the component is in a vise, you can often judge perpendicularity by looking from two directions simultaneously.

Begin turning the tap wrench clockwise—the same direction you would turn a bolt clockwise to tighten it. Apply steady, moderate pressure. Unlike drilling, tapping is a controlled, deliberate process. Turn the tap slowly. After every half-turn to full turn, turn it backward slightly (counterclockwise) to break the metal chips that accumulate. This backward motion prevents chips from jamming the tap and causing it to break.

Continue tapping until the tap reaches the correct depth. As you turn the tap, you'll feel it cutting into the metal—there will be moderate resistance. This is normal. If you suddenly feel a significant increase in resistance or the tap seems stuck, stop immediately and turn it backward gently to remove it. Forcing a tap deeper when it's stuck can break the tap, which creates an even more difficult repair situation.

Once the tap reaches the correct depth, turn it backward to remove it from the hole. Remove the tap wrench. Inspect the hole carefully. The inside should show clear spiral grooves—the threads you just created. These grooves must